To view/change Dialogic Parameters, select CALLMaster Manager | Parameters | Dialogic.
Dialogic Parameters 77 thru 93
Parameter: | MAXSLOFF |
Description: | Silence Off Maximum for pulse detection |
Default: | 25 |
Range: | 1-1000 in 10 ms |
Usage: | Maximum time for silence being off during audio pulse detection. |
Parameter: | MINISL |
Description: | Silence Off Minimum for pulse detection |
Default: | 25 |
Range: | 1-1000 in 10 ms |
Usage: | Minimum time for silence on between pulse digits for audio pulse detection. |
Parameter: | MINSLOFF |
Description: | Silence Off Minimum for pulse detection |
Default: | 2 |
Range: | 1-1000 in 10 ms |
Usage: | Minimum time for silence being off during audio pulse detection. |
Parameter: | MINSLON |
Description: | Silence Off Minimum for pulse detection |
Default: | 1 |
Range: | 1-1000 in 10 ms |
Usage: | Minimum time for silence being on during audio pulse detection. |
Parameter: | MINTIOF |
Description: | Minimum time between rings-received events |
Default: | 5 |
Range: | 1-1000 in 10 ms |
Usage: | Minimum time between rings-received events. |
Parameter: | MINTION |
Description: | Minimum time between rings-received events |
Default: | 5 |
Range: | 1-1000 in 10 ms |
Usage: | Minimum time required for rings-received events. |
Parameter: | MFMINON |
Description: | Add duration to MF tonents |
Default: | 0 |
Range: | 1-1000 in 10 ms |
Usage: | The duration to be added to the standard MF tone duration before the tone is detected. |
Parameter: | MFTONE |
Description: | MF tone duration |
Default: | 6 |
Range: | 1-1000 in 10 ms |
Usage: | Mf tone dialing duration. |
Parameter: | MFDELAY |
Description: | Silence between MF Tones |
Default: | 6 |
Range: | 1-1000 in 10 ms |
Usage: | The length of silence between MF tone dialing. |
Parameter: | MFLKPTONE |
Description: | LKP tone during MF dialing |
Default: | 10 |
Range: | 1-1000 in 10 ms |
Usage: | LKP tone during MF dialing |
Parameter: | MINOFFHKTM |
Description: | Minimum Off Hook Time |
Default: | 250 |
Range: | 1-1000 in 10 ms |
Usage:Minimum Off Hook Time |
Parameter: | DFLAGS |
Description: | DTMF detect on leading or trailing edge of signal |
Default: | 0 |
Range: | 0,1 (1 -Trailing Edge; 0 - Leading Edge) |
Usage: | The edge in which the DTMF digit will be reported. |
Parameter: | DTINITSET |
Description: | DTMF tone to initiate play |
Default: | 0 |
Range: | bitmask |
Usage: | Bit mask representing what DTMF digits to initiate play on. |
Parameter: | DTMFTLK |
Description: | Playback DTMF filter time in 1/18 seconds |
Default: | 5 |
Range: | 0-9 (10 ms per unit) |
Usage: | Minimum time for DTMF to be present during playback to be considered valid. When a suspected DTMF signal is detected, playback is turned off for the specified duration to determine the source of the signal and prevent termination of playback by incorrectly interpreting voice data as DTMF. In other words, it sets a minimum tone time so that a human voice isn't interpreted as a touch-tone. |
Parameter: | DTMFDEB |
Description: | DTMF absence maximum length |
Default: | 0 |
Range: | 1-1000 |
Usage: | Maximum time which DTMF can be absent and return and still be considered the same tone. |
Parameter: | MFMODE |
Description: | Multi-Frequency signaling mode |
Default: | 2 |
Range: | 1-100 10ms |
Usage: | Used in T1 signaling |